Monsterpod

We tried this great new product out recently. It really will stick to pretty much anything and comfortably holds a digital compact camera or similar sized device.

MonsterPod is the most amazing, most universal, revolutionary camera tripod on planet earth! The MonsterPod will mold, grip, stick and firmly adhere to nearly any surface as it holds your camera motionless, temporarily, until you peel it off.

MonsterPod sticks to a 1,000 objects and counting! It molds, grips and sticks to metal, wood, plastic, veneer, marble, cement, steel, brick, glass, tile, enamel, sheet rock, rocks and trees! If the object is irregular in shape you simply mold the base with your fingers until it conforms to the shape.

The MonsterPod has no telescoping legs, clamps, beans, straps, glue, or suction cups, not even magic. Instead, the MonsterPod sticks to surfaces via a patent pending viscoelastic morphing polymer.!!!

Frequently asked questions

How does it work?
Easy! Just screw the MonsterPod into your camera and mount it to a table, chair, wall, window, ceiling, rail, fire-hydrant, light-post, parking meter, hand rail, rock or even a tree (pine tree or palm tree, it makes no difference). Set your timer and shoot! Fast! Simple! Easy! Convenient! Instantly storable in your pocket or purse!

What angle will it grip?
MonsterPod holds your camera absolutely motionless horizontally, vertically or upside down! At any angle, on nearly any surface!!

What happens if it gets dirty?
MonsterPod is a polymer. It does not dry or harden over time. It has the ability to absorb dirt, sand, bark and grime. You simply wipe, brush, wash off any dirt that the polymer base may come in contact with. If you can not wash it off, simply massage the dirt into the polymer and the dirt will not affect the stickiness.

How long does it stick?
MonsterPod only forms a "temporary" bond with other surfaces. Normally it will provide one minute to one hour of stabilisation, depending on the type of surface and degree of angle.

How do I take it off?
MonsterPod is simple to dislodge from where it is mounted. With a gentle tug to the base, it will peel right off. If not, you may at times need to reach your fingers under the base and pull it off.

What objects can I stick it on?
MonsterPod can be used to support your digital camera by molding its Viscoelastic Morphing Polymer base to, but not limited to, the following: metal, wood, plastic, veneer, marble, Formica, cement, block, steel, brick, glass, tile, enamel, sheet rock, and even rocks and trees.

Will it stick to my skin?
MonsterPod will not adhere to the skin nor is it harmful to the skin.

Can I hold it in my hands?
MonsterPod can be kept attached to your camera and molded to conform to any shape. You can even mold it into a handle to better hold your compact camera to provide additional support when taking pictures.

Is it messy?
MonsterPod is not a gel. It is an elastic solid...viscoelastic polymer. This viscoelastic polymer is contained within a neoprene membrane and will not harm or affect your camera.

What is it made out of?
MonsterPod is completely non-toxic. It is free from solvents and harmful chemicals. Children can play with it. Animals will not be harmed by it. It is made from three main elements: 1) a viscoelastic morphing polymer base, 2) a neoprene outer membrane, 3) an internal semi-ridged metal and plastic base.

Can it fall off?
MonsterPod was developed to provide a temporary mounting device for compact digital cameras. It is designed to hold a 10 oz or less camera for a period of time long enough to set the automated timer and take a picture. It will begin to ooze (stretch) from its location after several minutes.

Does heat or cold affect it?
MonsterPod is not affected by cold or heat. You can use it on cold winter days or on hot summer days.

What cameras will it support?
MonsterPod will support nearly all compact digital cameras. Nearly 90% of all compact digital cameras manufactured today weigh less than 10 oz. (300 grams) and can be supported.

How do I attach it to my camera?
MonsterPod is mounted to your camera using the same threaded hole in the bottom of your camera as other tripods. To be exact the hole size is 1/4 inch with a #20 thread.